The Urban Area: The Manila urban area ranks as the world’s fifth largest urban area (area of continuous urban development) with a population of approximately 21,000,000 (Note 1) covering a land area of 550 square miles (1,425 square kilometers). The urban population density sits at approximately 38,000 people per square mile (14,500 per square kilometer).
Like nearly all major urban areas of the world, Manila has experienced substantial suburbanization over recent decades and substantially falling urban population densities. In 1950, the core municipality of Manila had a population of under 1 million people, and it represented approximately 60 percent of the urban area population. Over the intervening years, the core of Manila grew by approximately 700,000 people, while the balance of the urban area added nearly 20,000,000 people (Figure 1).
A Forbes article indicates that Manila is the highest density major municipality in the world with a population density of nearly 115,000 per square mile (45,000 per square kilometer). This is more than double the population density of ville de Paris. The core has a population of approximately 1.7 million in a land area of 15 square miles (39 square kilometers).
The densest district reaches nearly 180,000 people per square mile (70,000 per square kilometer). Even so, this is far less dense than some parts of Hong Kong (more than 1.1 million per square mile and more than 400,000 per square kilometer). Even higher densities existed in the early 20th century Lower East Side in New York (according Jacob Riis, author of A Ten Years’ War: An Account of the Battle with the Slum in New York). Even higher densities were reached during the late 1980s in Hong Kong’s now demolished Kowloon Walled City, variously estimated at up to 5 million per square mile (2 million per square kilometer).
The inner suburbs, the balance of the National Capital Region now have approximately 10,600,000 residents. The population density drops substantially from the core to the inner suburbs to approximately 45,000 per square mile (18,000 per square kilometer). The outer suburbs, which are composed of the portions of the urban area outside the National Capital Region, have a population of more nearly 8.5 million and a considerably lower density at 28,000 per square mile or 11,000 per square kilometer (Figure 2).
As early as the 1950s, the suburbs have captured most of the urban areas growth. Between 1950 and 1980, the core municipality attracted between 10 percent and 20 percent of the urban area growth. The core municipality of Manila reached a population peak of nearly 1.6 million in 1980, which it has only been recently exceeded. From 1980 to 2000, virtually none of the urban growth took place in the core of Manila, though it captured roughly 2 percent of the growth from 2000 to 2010 (Figure 3).
As of 2010, it is estimated that eight percent of the population lives in the core municipality of Manila, 51 percent in the inner suburbs and 40 percent in the outer suburbs (Figure 4).
The Metropolitan Area: Unlike urban areas, there are no international standards for the delineation of metropolitan areas (labor markets including extensions beyond urban areas). Serious attempts to compare international metropolitan area data have been rare (Note 2). Nonetheless, the evolution of Manila as a metropolitan area can be independently reviewed based upon a provincial level analysis.
The Manila urban area occupies all or part of six provincial level jurisdictions. The largest population is in the National Capital Region, which is somewhat misleadingly referred to as "Metro Manila", despite being only a part of the metropolitan area. This is similar to Tokyo, where the prefecture of Tokyo is referred to as the "Tokyo Metropolis," yet represents only one third of the metropolitan area population. The metropolitan area also extends into the provinces of Rizal (from which the National Capital Region was carved in 1976), Cavite, Laguna, Bulucan and Batangas. The total population was estimated at 26.5 million in 2010 (Note 3).
The metropolitan area’s population growth is strongly moving toward the outer suburbs (the five provinces outside the National Capital Region). Between 1970 and 1990, the inner suburbs captured 61 percent of the metropolitan area growth, compared to 36 percent in the outer suburbs. Between 1990 and 2010, the outer suburbs accommodated 64 percent of the metropolitan areas population growth, compared to 34 percent for the inner suburbs.
Commercial Development: The suburbanization of Manila has not been limited to residences. New, world class commercial cores have been developed that have displaced many of the traditional functions of the older commercial core of Manila. Makati, a municipality to the east of Manila and within the National Capital Region now has the largest business district (photo), while a nearly as large commercial core has developed in Ortigas, just to the north (photo). There are other developing office centers such as the somewhat more distant commercial center near the southern border of the National Capital Region in Muntinlupa. This is similar to the kinds of newer commercial developments that have supplanted traditional business districts in urban areas such Mexico City (Reforma and Santa Fe) Sao Paulo (Paulista and Luis Carlos Berrini) and Istanbul (Levant).These developing country cities have experienced an economic decentralization of business that surpasses that of American edge cities.
Makati
Ortigas
Manila’s Ominous Future? Manila faces an especially difficult future. The Philippines is projected to have one of the strongest urban growth rates in the world over the period to 2050. Since 1950, the Manila urban area has captured nearly 50 percent of the urban population growth of the nation. If this rate were to continue, the Manila urban area would reach a population of between 45 and 50 million by 2050. This is approximately 10,000,000 more than live in Tokyo, the world’s largest urban area today.
But Manila faces even greater problems, related to the intense poverty of much of the population migrating to the urban area from the countryside. The Philippine Institute for Development Studies (PIDS) estimated that 4 million of the 11.5 million residents in the National Capital Region lived in slums (shantytowns or informal settlements) in 2010 (Photo). PIDS indicates that this population is increasing at a rate of eight percent annually and is expected to reach 9 million by 2050. This would be nearly 60 percent of the projected population at that time, and does not include slum populations in the extensive suburbs beyond the limits of the National Capital Region.
As if the poverty were not enough, Manila has been plagued by disastrous slum fires, the most recent within the past week. According to the Manila Times up to 10,000 people were left homeless by this most recent fire, which was in Makati, home of the metropolitan area’s largest and most prestigious business district.
Manila also experiences some of the world’s worst traffic congestion, as people increasingly travel by car on its largely substandard road system. Perhaps even more surprisingly, a substantial number of detached housing communities have been developed, especially on the urban fringe.
Manila’s challenge will be to accommodate the millions more who will seek a better life in the urban area and to do so while materially improving the standard of living as urgently as possible.
———
Note 1: This urban area population is considerably above the figure reported by United Nations (11.6 million). United Nations figure is for the National Capital Region, which is also referred to as Metro Manila. In fact, the urban area stretches well beyond Metro Manila. This population estimate is based upon a build-up of smaller area population totals within the continuously develop urban area.
Note 2: By far the most comprehensive attempt to apply consistent criteria to international metropolitan areas, was by urban expert Richard L. Forstall (who ran the Rand McNally "Ranally" international metropolitan area program), Richard P. Green and James B. Pick. The complexity of the research is indicated by the fact that their list is limited to the top 15 in the world.
Note 3: The metropolitan population is estimated by applying the 2000 to 2007 annual growth rate to from 2007.
Wendell Cox is a Visiting Professor, Conservatoire National des Arts et Metiers, Paris and the author of “War on the Dream: How Anti-Sprawl Policy Threatens the Quality of Life”
Lead Photograph: Urban fringe development: Laguna province (outer suburbs). All photographs by author.
Comments
29 responses to “The Evolving Urban Form: Manila”
I discovered your blog site on google and check a few of your early posts. Continue madeira plastica to keep up the hyundai hb20S very good operate. I just additional up your allpex RSS feed to my MSN News Reader. Seeking forward to reading more from you later on!…
Super-Duper site! I am Loving it!! Will come back again, Im taking your feed also, Thanks.
Glutamine Supplement
I found this is an informative and interesting post so i think so it is very useful and knowledgeable. I would like to thank you for the efforts you have made in writing this article. vanheessen manager
Excellent publish from specialist also it will probably be a fantastic know how to me and thanks very much for posting this useful data with us all.
Get more info about ILC Expo
If you find that a long journey in a cramped automobile holds no appeal, consider airline travel. If you want to be ready to go when you arrive at your destination, airline travel holds the key. emirates airlines
Avoid Repossession Today has been formed to help people deal with the fears of repossessions, we work alongside a renowned solicitor with over 20 years experience and success in repossession cases. This allows us to ensure you are getting the best possible help and advice. Learn More avoid repossession
You could write about the graphics on the blog. You may promote it’s high caliber. Your blog ordeal might add to your money. Vakantie
Useful information, on account of the author. And disconcerting in my opinion now, but normally the usefulness and importance is enormous. Zonvakantie
Thanks for sharing an excellent article! That is certainly very worthwhile I adore reading that i’m always searching for informative information such as this. Wintersport
Useful information ..I’m thrilled to ought to see this article..many thanks giving us this useful information. Fantastic walk-through. I see why post. Vliegvakantie
Lush Acres EC is a 99-years leasehold Punggol EC development located Sengkang West Way / Fernvale Link in District 19. With expected completion in mid-2016, it comprises of 3 towers with 380 units and stands 25 storeys tall. new executive condo
Here are some tips for Making the Most Out Of your GoPro. The information below is by no means golden but hopefully it will help. Users will find some really useful tips here, which are bound to improve the user experience. visit here GoPro Tips
Great stuff of your stuff, man. I’ve read your stuff before and you’re too awesome. I enjoy what you’ve got here, love what you’re saying and exactly how you say it. website design manchester
Seize His Coronary heart And Make Him Appreciate You Eternally reveals you the blunders that each one a single of us will make, without the need of even knowing it, and the way the minor matters that we do regularly may have a tremendous impact on locating and maintaining Mr. Ideal inside your existence, stories Stevenson. The very important information and facts offered with this on line software can equally as properly use to exact same sexual intercourse interactions in addition http://www.capturehisheartmakehimloveyouforever.blogspot.com.Following a Seize His Coronary heart evaluate it’s got been observed that it’s an promptly downloadable method that teaches women of all ages why their thoughts are one particular of the man’s most significant fears, describes precisely why fellas are afraid of these, addresses the dread of rejection, plus the ‘real’ distinctions amongst individuals.
The Old School New Body is a twelve-week program designed to help you drastically lose weight and help you achieve your goals. Unlike many other programs that place more focus on supplements than anything else, the Old School New Body is more about eating right, exercising properly read old school new body book, setting goals ans let us not forget stress management, an often overlooked factor affecting the success of your weight loss regime.
Thanks for any quite interesting site. Where else could I recieve that type of info designed in this kind of ideal approach? I’ve got a undertaking that I am at the moment focusing on, and I have been in the consider similarly info TANTRIC MASSAGE LONDON
Thank you for for sharing so great thing to us. I definitely enjoying every little bit of it I have you bookmarked to check out new stuff you post nice post, thanks for sharing. The Inflora
Skin Whitening Forever features the solution to people yearn to possess a lighter skin tone that’s normal and completely drug totally free. Pores and skin Whitening Eternally creator Eden Diaz, an Optional Health Practitioner with extended years of experience in dermatology industry who was also tired of futile over the counter products and solutions has uncovered natural home made whitening remedies by yrs of studying and demo and error skin whitening forever review. Even children endured these effects of mercury poisoning both from in-utero absorption while pregnant, or from moms who made use of this sort of cream on their own youngsters, seeking them to obtain the advantages of light-weight pores and skin.
The neodymium magnets are available in a anisotropic and isotropic execution . In most cases, one opts for the isotropic magnets , because their energy density and residual flux density is about twice higher than in the ferrite magnets. For the anisotropic magnets, these values are even four times higher. For further information visit http://processnetone.com
Neodymium magnets are a rare earth magnet that is made from neodymium, iron, and boron. This type of magnet was first developed. Neodymium Magnets is no doubt the strongest and the most popular rare earth magnets. http://mobileworkorder.com
Ferrite magnets are a composite of iron oxide and barium. While these permanent magnets are low in cost. ferrite magnets are perhaps the most popular type, mostly because of their flexibility. http://radiosoundstation.eu
Magnets have always been interesting objects, whether one discovered them early in toys and was entertained or was introduced to magnets. Magnets are particularly functional in various simple applications. They can even be very useful in different stages of construction projects. http://rcclubs.org
NdFeB magnets have one of the highest energy products. Sintered NdFeB magnets are hard and brittle. To protect the magnet from corrosion and to strengthen the brittle magnet material. http://forspin.com
Permanent magnet generators are a popular form of alternative energy that people are becoming more and more interested about. Magnets are particularly functional in various simple applications. They can even be very useful in different stages of construction projects. http://meldworks.com
Almost everyone has had some experience with magnets and their versatility. An electric permanent magnet motor is all about magnets and magnetism. You should know from experience that the north end of a magnet will. http://iccah.com
Magnets can be a fantastic way to market your company if they are used correctly. Neodymium magnets are a rare earth magnet that is made from neodymium, iron, and boron. For more information at http://er-mediagroup.com
Pizza is one of the wonder foods of the 21st century.Building a wood fired pizza oven in your own backyard may well be one of the most enjoyable and rewarding projects out there. There are a vermiculiteboard.co.uk
If you have ever eaten a pizza cooked in a wood burning pizza oven, you know how delicious it is. The crust gets nice and crisp and the whole .The wood fired pizza oven is commonly known as Forno in Italian, or simply just wood ovens. refractory-cement.co.uk
Brick fireplaces add beauty to every home provided that it is well-designed and the materials used are strong, classy and stylish. Nothing is more welcoming than a brick fireplace. fire-cement.co.uk
Everyone wants something unique and unusual in their back yard. Wood fired ovens have gained a lot of attention in the recent past. Many people are opting to install the ovens on their decks and patios. A wood fired oven is not only a backyard essential but it can also be. ceramic-blanket.co.uk
Plastic injection moulding is the process of creating parts and products with thermoplastic or thermosetting plastic. These plastics are melted randyrabney.com
Plastic cups are becoming popular nowadays they are used by almost everyone. Plastic has been a part of day to day life for a very long time. knifedout.com
Making plastic parts is one of the most efficient ways to design and manufacture parts. The plastic manufacturing industry requires good equipment and … of each machine is set to create the specific plastic part or component .. patalytics.com
That’s quite interesting Smile I really like reading through and i’m always trying to find informative information such as this. This is just what I had been searching for. Thank you for discussing this excellent article ccrhv.net
Plastic injection moulding is a popular manufacturing process where parts are made through the injection of plastic into moulds. Injection moulding is one of the most popular ways to create plastic products. Injection moulding machine works in a few stages. pjclarkslp.com
Plastic injection moulding is a process which is used to manufacture a range of plastic products. Companies that specialize in manufacturing many of the plastic items you use around your home are made using the process of injection moulding. msbaplacement.com
The majority of thermoplastics, such as nylon, polystyrene and polycarbonate are produced through the injection moulding process. Injection moulding is an efficient and effective way of producing quality plastic goods. project-dirigible.com
Plastics have become an integral part of human life. Most countries’ economies thrive on the business of plastic manufacturing and sales. Injection moulding is an efficient and effective way of producing quality plastic goods. bitwavedesigns.com
Plastic products are widely used and they are in great demand in domestic as well as global market. It is an undeniable fact that plastics have become an integral part of the modern world. Today, literally everything can be made from plastic. berlingoya.com
The development of plastic was one the most significant developments in modern history. Plastic is a very popular material that is used in almost all the industries. Visit partner-pths.com
Love them or hate them – Plastics are everywhere! They have become an important part of modern life, in industry Plastic is everywhere. There are many types of plastics materials. studiobwv.com
The plastic industry is huge. The plastics industry has grown in leaps and bounds over the last several decades. Initially there were only few kinds of plastic compounds. deformation-studio.com
Plastics play an increasingly important role in both industrial as well as in daily life. Their use is therefore made of everyday life. Very often these materials are irreplaceable, if you built through certain types of construction. ichliebekunststoff.de
Plastics are the best for the production of different packaging materials that are used in the household or in industry. These materials are in fact a versatile and multi-functional product. Due to their properties, these materials have become almost ubiquitous since tens of years. meinplastikwelt.de
The universal plastic material that is used to construct disposable car covers. is a commercial grade plastic that is designed to fend off common. The products of plastics caused by the use of different methods. These mainly include injection molding and blow molding. universellekunststoff.com
Plastics are widely used in agriculture. It produced therefrom including such elements as: seeders, sprayers, milking machines, irrigation systems, different breeding units. Large containers or packages of mechanisms to set as more and more of polyester ago. fabrikderwelt.de
Plastic Injection Molding industry has grown at fast pace. With the updated technology, this demand has broadened its horizon in areas of toys. Plastic Injection moulding is a process of forcing molten plastic by the application of pressure. during-design.com
Plastic manufacturing companies manufacture an extensive range of high quality Plastic Caps and Plastic Spouts, which are available in various patterns, colors, sizes and thickness and are offered at competitive prices. primebarta.com
Injection moulding is one of the most popular ways to create plastic products. Injection moulding machine works in a few stages. Moulding can be precisely defined as giving a particular shape to something in a molten or plastic. myezira.com
Spending time to research on what to expect from a plastic molding manufacturer will help you make the best choices with regard to getting the highest quality services and products. If you find yourself in need of plastic manufacturers we are here to help you. iloveplastics.net
Plastic Injection moulding is a production method that can deliver any number of plastic goods. If the quality and efficiency of production are the two things you aim at as a manufacturer, then you must be more than aware that the right plastics suppliers are everything. Try us! plastic-materials.eu
The world these days is almost entirely dependent on various sorts of the plastic material. Our plastic materials are used in a variety of industries including aerospace, medicine, space, electronics, hydraulics, and more .. Visit plastics-products.com
If you find yourself in need of plastic manufacturers we to take care of your endless and in the case of typically Polish conditions, also quite challenging customizable moulds, you couldn’t have ended in any better hands! Meet the association of plastic manufacturers ready to deal with whatever task you might be currently faced with! choose-plastic.com
If you’re looking for a good accommodation in Krakow, Then we are here to help you. The Antique Apartments accommodation service offers a great number of apartments for rent. All apartments are located within the city centre area but please consider booking your stay in advance in order to get the best deal. lanxunzhineng.com
The Old Town area of Krakow is definitely the most popular tourist attraction in the city. However, you can now experience what it feels like to be a part of this fantastic place by renting one of the apartments courtesy of Antique Apartments. The Antique Apartments accommodation service offers a great number of apartments for rent. dsmetalfabrication.com
Krakow is visited by millions of tourists every year. Most of them come to this city in search of pure history which available there almost on every street. The Antique Apartments accommodation service offers a very comprehensive selection of rental apartments located in the Old Town area of Krakow freechristiangreetings.com
Even before all the denials and lawsuit threats and legal stances by all involved, a porn site has provided former Miss Delaware Teen USA 2012 Melissa King a job as their worldwide representative. That is right. As TMZ reported Wednesday (Feb. 27) , a hardcore porn website provided King a quarter of one million dollars to put it up adult video for sale. When requested by The New Journal (Delaware On-line) if she and the younger woman having sex in the video with an unidentified male were the one and the identical, King responded. “Absolutely not.” She later added, “There are comments saying this, nevertheless, it’s not feedback that are true.”